您當前所在位置：主頁 > 產品展示 > 動力卡盤(power chuck) >
KZW53-D-RF系列外圓配氣大行程前置氣動卡盤
KZW53-D -RF SERIES FRONT-MOUNTED PNEUMATIC CHUCK WITH EXTENDED JAW STROKE AND AIR FEED VIA THE OUTSIDE DIAMETER
發布時間：2015-05-15 16:16
□ 氣缸內置，驅動力通過斜楔機構傳遞。工作穩定可靠。在加工期間，卡盤通過雙作用單向閥保持壓力。只有在主軸完全停止時，壓縮空氣才能通過配氣盤和配氣圈供給?？ㄗ哂锌煲坪蛫A緊行程
Chuck with built-in cylinder, driving force is transmitted through the wedge mechanism. It is stable and reliable in work. Built in double non-return valves maintain the air pressure during machining. The compressed air feed via distributor ring and profile seals only when the spindle completely stops.With rapid and clamping jaw stroke.
□ 配氣盤的安裝和定心調整通過固定于主軸箱端面的配氣盤支架實現，保證與旋轉的卡盤不存在任何接觸。為提高操作安全，可根據用戶要求增加壓力和夾緊行程監控裝置。
The stationary distributor ring must be mounted so that no contact exist against the rotating power chuck. The distributor ring is centered and laterally mounted by means of a bracket fixed to the headstock of the lathe. To ensure the safety, a safety control system supplied according to the customer’s request, so that clamping pressure level and clamping stroke control can be monitored.
| 型號/規格 MODEL/SIZE | A | B | C | DH6 | E | F | G | G1 | H | H1 | J | K | L | M | N (Inch) | O | p | |
| KZW53-D-RF | 460D-181 | 467 | 181 | 467 | 310 | 400 | 374 | M12 | 25 | 240 | 238 | 8 | 448 | 20 | 6×M8 | Rc3/8 | 37 | 26 |
| 570D-205 | 570 | 205 | 570 | 415 | 500 | 474 | M12 | 25 | 282 | 280 | 8 | 550 | 20 | 6×M8 | Rc3/8 | 37 | 26 | |
| 570D-230 | 570 | 230 | 570 | 415 | 500 | 474 | M12 | 25 | 282 | 280 | 8 | 550 | 20 | 6×M8 | Rc3/8 | 37 | 26 | |
| 605D-275 | 605 | 275 | 605 | 450 | 535 | 508 | M12 | 25 | 282 | 280 | 8 | 585 | 20 | 6×M8 | Rc3/8 | 37.5 | 30 | |
| 685D-325 | 685 | 325 | 685 | 510 | 610 | 580 | M16 | 30 | 297 | 295 | 8 | 666 | 20 | 6×M8 | Rc1/2 | 38 | 30 | |
| 800D-375 | 800 | 375 | 800 | 600 | 735 | 700 | M16 | 33 | 305 | 300 | 9 | 780 | 25 | 6×M10 | Rc1/2 | 45 | 30 | |
| 1000D-550 | 1000 | 550 | 1000 | 700 | 920 | 880 | M20 | 40 | 335 | 300 | 10 | 980 | 20 | 6×M10 | Rc1/2 | 38 | 32 | |
| 型號/規格 MODEL/SIZE | a | b | c | d | e | (較小/較大)f (Min/Max) |
g | (較小/較大)h (Min/Max) |
α° | β° | |
| KZW53-D-RF | 460D-181 | 57 | 25.5 | 3/32×90º | M20 | 16 | 38/69 | 106 | 122/142 | 20º | 9×40º |
| 570D-205 | 57 | 25.5 | 3/32×90º | M20 | 16 | 38/100 | 140 | 145.6/171 | 15º | 12×30º | |
| 570D-230 | 57 | 25.5 | 3/32×90º | M20 | 16 | 38/87 | 127.5 | 158/183.4 | 15º | 12×30º | |
| 605D-275 | 57 | 25.5 | 3/32×90º | M20 | 16 | 38/76 | 117 | 181/206.4 | 15º | 12×30º | |
| 685D-325 | 70 | 25.5 | 3/32×90º | M20 | 16 | 38/92 | 134 | 208.6/234 | 15º | 12×30º | |
| 800D-375 | 75 | 30 | 3/32×90º | M24 | 20 | 47/118 | 168 | 232.6/258 | 15º | 12×30º | |
| 1000D-550 | 75 | 32 | 3/32×90º | M24 | 20 | 47/112 | 166 | 328.6/354 | 15º | 12×30º | |
| 型號/規格 MODEL/SIZE | 通孔直徑 (mm) THRU-HOLE DIAMETER | 卡爪行程 (mm) PER JAW STROKE |
工作壓力(bar) （較小/較大） OPERARING PRESSURE (bar) (MIN/MAX) |
活塞面積 (cm²) PISION AREA |
夾緊力- 使用壓力 6bar(KN) CLAMPING FORCE-OPERATING PRESSURE AT 6BAR |
較高 轉速 (r.p.m) MAX. SPEED | 空氣消耗量 -壓力6bar（L） AIR CONSUMPTION -JAW STROKE AT 6 BAR |
重量 （不含卡爪） （kg） WEIGHT (WITHOUT TOP JAWS） |
轉動慣量 （kg.•m²） MOMENT OF INERTIA |
|
| KZW53-D-RF | 460D-181 | 181 | 13+7 | 3/10 | 592 | 105 | 1100 | 22 | 195 | 10 |
| 570D-205 | 205 | 16.9+8.5 | 3/10 | 1004 | 180 | 1000 | 47.5 | 340 | 16.4 | |
| 570D-230 | 230 | 16.9+8.5 | 3/10 | 895 | 160 | 1000 | 42.5 | 325 | 16.1 | |
| 605D-275 | 275 | 16.9+8.5 | 3/10 | 954 | 171 | 800 | 45.5 | 360 | 19 | |
| 685D-325 | 325 | 16.9+8.5 | 3/10 | 1181 | 200 | 700 | 56 | 483 | 36 | |
| 800D-375 | 375 | 15+10.4 | 3/10 | 1498 | 195 | 600 | 70 | 712 | 72 | |
| 1000D-550 | 550 | 15+10.4 | 3/10 | 1710 | 287 | 400 | 71 | 1150 | 185 | |
